BoX2 base v2 / pro (SC) (motion) / extreme (SC), Configuration and Image Manual, MAEN363

This manual replaces MAEN205 rev. D

• BoX2_Configuration_and_Image_Manual_MAEN363_2023-06-07.pdf.pdf

CN2021C2304-000756-1 Beijer Additional page_Installation Instructions Requirements

• CN2021C2304-000756-1 Beijer Additional page_Installation Instructions Requirements.pdf

BoX2 extreme (SC) Installation Manual, MAEN276

• BoX2_extreme_MAEN276_English.pdf

BoX2 extreme manual for protection class ec, ​MAEN276B

​​Manuals for protection class ec

• BoX2_extreme_MAEN276B_English.pdf

DNV Type Approval Certificate BoX2 pro BoX2 extreme

​DNV Type Approval Certificate BoX2 pro BoX2 extreme

• TAA000021B-revision2.pdf

BoX2 pro (SC), BoX2 extreme (SC) - ABS Type Approval Certificate

​ABS Type Approval Certificate for BoX2 pro (SC), BoX2 extreme (SC)

• ABS Certificate BoX2 IoT Gateways (PROD CERT - 1382938 - 1 - A1) - 1.PDF

BoX2 pro (SC) / BoX2 extreme (SC) - BV certificate for

• 54567_B0 BV.pdf

IECEx Certificate X2 extreme (SC) / BoX2 extreme (SC)

• IECEx_UL_17.0058X_1.pdf

BoX2 pro (SC) / BoX2 extreme (SC) DNV - GL Type Approval Certificate

​DNVGL Type Approval Certificate box2 pro, box2 extreme

• DNVGL Certificate BoX2 IoT Gateways (PROD CERT - 1382943 - 1 - A2) - 1.PDF

ATEX Certificate X2 extreme, X2 extreme sealed, Box2 extreme

​ATEX Certificate X2 extreme, X2 extreme sealed, Box2 extreme

• X2 extreme (Panel, Sealed, BoX2) - ATEX Type Examination Certification (PROD CERT - 1286939 - 1 - A2) - 1.PDF

BoX2 base / BoX2 pro / BoX2 extreme FCC - Verification of compliance

• BoX2 base_ FCC Verification.pdf
• BoX2 extreme_ FCC Verification.pdf
• BoX2 pro_ FCC Verification.pdf

CE certification, BoX2 base - BoX2 pro - BoX2 extreme

• BoX2 base_ CE Verification.pdf
• BoX2 extreme_ CE Verification.pdf
• BoX2 pro_ CE Verification.pdf

X2 extreme (SC) / BoX2 extreme (SC) update IECEx ATEX 2021

​update IECEx  ATEX 2021

• DEMKO 17 ATEX 1900X Rev. 4.pdf
• IECEx UL 17.0058X 004.pdf

X2 extreme (SC) / X2 extreme sealed (SC) / BoX2 extreme (SC), CE manufacturer declaration

​CE manufacturer  declaration X2 extreme x2 extreme sealed box2 extreme

• DoC CE EMC ROHS Declaration of confromity X2 extreme Variants 10052021.pdf

X2 extreme (SC) / BoX2 extreme (SC), CCC ex-zone

CCC ex-zone

• SKM_658e21060218140.pdf
• SKM_658e21060218150.pdf
• SKM_658e21060218151.pdf
• SKM_658e21060218152.pdf
• SKM_658e21060218153.pdf
• SKM_658e21060218160.pdf

BoX2 pro (SC) / BoX2 extreme (SC), SAFE COMPASS DISTANCE INFORMATION,

​Compass safe distance BoX2

• Compass safe distance BoX2.pdf

BoX2 Erase / Delete Project with USB

The attached file is a .json that can be put on a USB stick and then plugged into a BoX2 to remove the project running on the device.

The following are the instructions on how to use it:

1. Put the attached json file in the root of an USB memory, it will be used to try delete the existing iX project on the BoX2 pro.
2. Plug the USB in while the BoX2 is running and wait until the LED turns red.
3. Remove the USB memory when the LED starts to flash purple and then reboot the BoX2.
4. When the BoX2 has booted the LED should flash purple which indicates that the unit is in standby and no iX project is running.
5. After this you should be able to transfer your iX project to the BoX2 from iX Developer.

• BoX2ConfigSet.zip

Box2 Diagnostics, manual and LED

• BoX2 Manual .pdf
• Box2Diagnostics.zip
• Box2Diagnostics_vnc.zip
• ReadBox2Diagnostics_OPCUA.zip
• ReadBox2DiagnosticsModbusTCP.zip

X2 pro (SC) / X2 marine (SC) / X2 extreme (SC) / BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC), Battery replacement

17.oct.2018

General
X2 series operator terminals use Lithium batterys to  retain RTC data(Real Time Clock), and Persistent variables (battery backed variables), in terminals with onboard codesys PLC (control \ motion versions) (stored in SRAM)

X2 Base: 
use a rechargable Lithium ion 200mA cell. (on print soldered)
Normaly not to be replaced. (need 48h to fully charge on startup)

X2 Extreme:
X2 extreme 7 & ( 12 V)  
BR2330A/GAN 3V 255mAh Non rechargable Button cell, Not user Replacable (soldered on print) 

All other extreme terminals use:
BR2477A/GAN 3V 1000mAh Non rechargable Button cell, Not user Replacable (soldered on print) 

​X2 Pro/Marine/control/ Motion:
BR2032 3V 200mAh Button Cell, non rechargable battery. User Replacable.
(remove backcover by unscrew the 4  torq screws ( T10) in each corner)

Lifetime:
The RTC current consumption is 3uA when power is off 
The SRAM current consumption is 1-2uA when power is off 

Lifetime depends on both temperature, and how much of the time the terminal is powered. 

A Standard X2 terminal with no SRAM (only RTC), charging 3uA when power is off should then last 200 000uAh : (3uA*24*365) = 7,6 years. (if never powered) (worst case is estimated to be = 5Years)

A Control terminal with SRAM the calculation would be: 
200 000uAh : (5uA*24*365) = 4,6 years. (if never powered) 

A standard terminal used 260 days\year 10h\day would last aprox 11 years.
200 000 : ((260days * 14hurs * 3uA) + (105days * 24hours * 3uA))

Warning:
When the Battery is due for replacement, a system warning dialogue will appear in the middle of the screen. This dialogue must be acknowledged to make it disapear. After a reboot the warning will occure again if the low battery condition remains.  


Some Details on lithium batterys
BR2032 brakes up to:
B - Positive electrode material (Carbon Monofluoride)
R - Round (shape)
20 - Diameter in mm
32 - Height in 1\10 mm = 3,2 mm

BR2032 vs CR2032:
Due to the differens in positive electrode material, BR cells self discharge slower than CR cells, (thus has longer "shelf time" (90% after 10 years)),  And has wider temp. range than CR  (-30 to +85 vs -20 to 70).
The voltage is tough the same (3V), and apart from the temp. spec. theese cells are compatible.

Box2 base / BoX2 pro (SC) / BoX2 extreme (SC), unknown IP \ reset \ reformat

​25.10.2019
IX 2.40SP4

If you have a BoX2, and do not know the IP of it, how can you then regain contoll of it?

- Port B in all X2 / BoX2 devices are default set to DHCP, so if lucky, you will find it by connecting the port B to a network with a DHCP service (e.g. your office)

- Secondary you need to create a new config file with the configuration software WARP, and then load this project (with known IP settings), from an USB stick. 

- The procedure on using WARP is described inn part 3.1.1 in the BoX2 manual attached, Beijer BoX2 Image Manual, User’s Guide, MAEN205 C
    

• BoX2 Manual .pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) LED indication

​24.10.2019

Status Diode of the Box2 has the following meaning:
Published in the box2 image manual 

• BoX2 Manual .pdf

BoX2 pro (SC) / BoX2 extreme (SC) - MTBF summary

The purpose of this document is to determine the reliability prediction according to the Telcordia 3 standard for the BoX2 products.

Valid for BoX2 pro / BoX2 pro SC / BoX2 extreme / BoX2 extreme SC

• MTBF Summary -box2.pdf

X2 / BoX2 extreme image V2.2 b1041 (Current version)

​Not valid for BoX2 extreme SC and X2 extreme SC

Important! Please note that all firmware files will be moved to smart store. You find this version in this link:  https://smartstore.beijerelectronics.com/en/Firmware/15042/x2-extreme-ver-2-2-b1041

​Related documents:

• x2 extreme v2.2 b1041 image.zip

X2 extreme / BoX2 extreme, image V2.1 build 430

​Image supporting X2 extreme series HMI and devices.

• X2 extreme LastMinuteNotes 2.1.pdf
• X2 extreme ReleaseNotes 2.1.pdf
• X2extremeImageLoader_build430.exe

X2 extreme (SC) /BoX2 extreme (SC) image V2.0 b365

​New release with support for acirro+ (from production only) and eboot update from USB.

• IML_X2extreme_v2.0_build365.exe
• X2 extreme LastMinuteNotes PIEN349E.pdf
• X2 extreme ReleaseNotes PIEN350E.pdf

3D drawing BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) in STEP format

​3D drawing box2 extreme in STEP format

• BoX2 basic_3D.STEP
• BoX2 extreme_3D.STEP
• BoX2 pro_3D.STEP

BoX2 extreme Outline Dimensions

• BoX2 extreme Outline Dimensions.PDF

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

BoX2 base / BoX2 pro (SC) / BoX2 extreme (SC) brochure BREN638 (english)

• Box2 brochure_180517_pages.pdf
• Box2 brochure_180517_spreads.pdf