G series GL-9089 EDS file for Ethernet/IP

​Attached file include EDS files for both:

• GL-9089 (standard version, Rev1.001, supporting 16 slices) 
• GL-9089-1 (special version, Rev2.001, supporting 32 slices)

• GL-9089 EDS files.zip

Quick start guide, Modbus TCP, Ethernet IP network adapter, GL-9089 and GN-9289 - SUEN00416

• GL-9089 and GN-9289, IP address Subnet and Gateway Setting SUEN00416.pdf

Beijer GN-9289 with Allen Bradley RS Logix video tutorial

A tutorial how to setup Ethernet/IP connection to GN-9289 Remote IO from PLC using the Generic Ethernet module in RS Logix 5000.

• Beijer GN-9289_Generic Adapter_Control Logix.mp4

G series, BootP Server for IP-setting at GN-9372 and GN-9289

​Software using Bootstrap Protocol (RFC 951) is for IP Address setting to Beijer G-series products.

• Copy file to PC
• Run "BootpServer.exe"
  

Link: G series, IP address, Subnet and Gateway Setting (KI00389)

• BootpServerVer1000_Beijer.zip

IO Guide Pro 1.2.0.3, for S- and G-series

​IOGuidePro is a configuration tool for the S- and G-series remote IO.
IOGuidePro can be used for assembling, parameter setting, addressing, commisioning and documentation of FnIO IO nodes.
Software has both on-line and off-line functionality and include all S- and G-series Network Adaptors.

• IOGuidePro_1_2_0_3.zip

IOGuide2(Beijer)-v2.0.0.0 [TEST version]

IOGuide2 supporting G- and M-series devices.

• IOGuide2-Beijer v2.0.0.0 (beta 12)
  

​Important information!

• IOGuide2-Beijer v2.0.0.0 (beta 12).zip

Firmware upgrade instruction for G- and M-series network adapters

​For the Remote I/O network adapters with RJ45 Ethernet interface follow this guide.

• Firmware upgrade instruction for G- and M-series_2024-12-02 (Rev.3).pdf

G-series GL-9089 Writing to adapter parameters fails

​GL-9089 with firmware 1.002

Supported function codes for writing network adapter parameters are FC06 (Single register) and FC16 (Multiple register)
Usage of FC06 will fail if the adapter is of version 1.002 or older.
"Modbus Error 02, Illegal data address"

Solution #1 Use FC16 and specify the amount of registers to write

Solution #2 Upgrade the adapter to firmware 1.003 or newer.

CNT-8412 (5-pin) powerplug / connector to GL-9xxx network adapters and PIO

Accessory name: CNT-8412
Part.No. 100-8186 ​

Common for both FnIO GL- and ML-series.

For example the spare part CNT-8412 power connector to be used for example to the GL-997x PIOs e.g. GL-9971/9972/9973/9974/9975 or the GL-90xx light network adapters e.g GL-9086 / 9086 / 9087 / 9089 etc. 

Ethernet port specification of G- / M-series PIO and Network adapters

• Ethernet port specification of the G- and M-series.pdf

FnIO M-, G- and S-series Serial number and Production date

​The serieal number of S-series is 11 digits, G- and M-series is based on 12 digits.
Note, for G- and M-series the last four digits xxxx.

Shock resistance of G- and M-series (IEC 60068-2-27)

According to IEC 60068-2-27 (shock operating) standard the general shock resistance is 15G for all G- and M-series modules.

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. These procedures are described:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

GN-9371 GN-9372 GN-9373 reset to factory push button function

​29.10.2025
To reset those to Factory default which erase projects and defaults IP settings, push and hold the push button located under the "flipp cover", for more than 20 sec. when all LED's start flashing, you can release, and then reboot. Now it is Factory fefault. 

Manuals

  

Release Notes for GL-9089_BE

• Release Notes for GL-9089_BE Rev1.006 (ENG).pdf

G series brochure, BRSE636 (Swedish)

• BRSE636- G series.pdf

G series brochure, BREN636 (english)

• 2015-429-G-series_low 2019-01-23.pdf

Conversion guide for alternative products between S-series remote IO to G- or M-series

​Use this PDF to chose a corresponding product. In some cases there are several alternatives that may need deeper investigating but in general:
- S- and G- (or M-) series modules cannot be mixed since they are mechanically different, however it is perfectly possible to have connect a S-series and G-series network adapter to the same network.
- The G-series is great all-purpose family that will work in most cases although not marine applications.
- The M-series is adapted for demanding applications and environments. It offers hot-swap and redundancy and is has a marine certifications.  

• FnIO Alternative module lists.pdf
• FnIO Alternative module lists.xlsx

G- and GL-series Drawing, 3D / 2D CAD files (Mechanical)

​File extension: *.pdf *.dwg *.stp (step)

• FnIO-G drawings (DWG, PDF) 20221129.zip
• GL-series_3D,2D CAD File_20230103.zip
• G-series Drawing Pdf Dwg Stp 20190221.zip
• G-series_3D,2D CAD File_20230103.zip

G- and GL-series Drawing, 2D CAD files #1 (Electrical)

​File extension: *.pdf *.dwg

• G-series_2D Diagram_rev.1_20220504.zip

UL & cUL Certificate of compliance - Beijer G-series

​FnIO G-Series Network Adapters and I/O Modules 

​NRAQ.E496087 - Programmable Controllers
NRAQ7.E496087 - Programmable Controllers Certified for Canada

• E235505-vol1-MLCertificateofCompliance-E496087.pdf
• E235505-vol1-MLCorrelation-E496087.pdf

CE DoC (Declaration of Conformity) for Beijer G-series modules following the EMC & LV directive.

CE declarations for the Beijer G-series remote I/O products. 

The latest update (Rev.1.1) and attachment include modules for both EMC - Electro Magnetic Compatibility directive and the LVD - Low Voltage Directive.

• 20240808 Beijer Electronics G-series products following the EMC and LV directive (Rev.1.1).pdf
• CE DoC manuafacture declaration Beijer G-series products (Rev.1.1) 20240808 - Signed.pdf